Follow this link to skip to the main content
NASA Jet Propulsion Laboratory California Institute of Technology
JPL - Home Page JPL - Earth JPL - Solar System JPL - Stars and Galaxies JPL - Science and Technology
Bring the Universe to You: JPL Email News JPL RSS Feed JPL Podcast JPL Video
MISR - Multi-angle Imaging SpectroRadiometer
  Gallery  
 Home
 Mission
 Get Data
 Gallery
Latest MISR Imagery
A Collection of MISR Imagery
Suggest an Image
MISR Instrument
AirMISR Instrument
AIrMISR Flight Imagery
 News and Events
 Publications
 FAQs
 Ask a Question
 About Us
 Other Resources
 Internal
A Collection of MISR Imagery
Smoke Plume Dispersal from the World Trade Center Disaster
Larger images available View high-res tiff

Smoke Plume Dispersal from the World Trade Center Disaster
09/06/2006

The collapse of the World Trade Center on September 11, 2001, and the fires that followed produced a noxious smoke plume, a complex mixture of tiny airborne particles and gases. Determining where humans may have been exposed to these contaminants and the amount of their exposure is very difficult. But recently, scientists from the Environmental and Occupational Health Science Institute Robert Wood Johnson Medical School and Rutgers University, in partnership with the Environmental Protection Agency and NASA's Jet Propulsion Laboratory have created a detailed numerical model that shows the pollutant dispersion from "Ground Zero" to the surrounding New York - New Jersey region.

Air pollution in the urban atmosphere can damage human health, biological systems, and vegetation. A team of science assessment experts is using this new computer model to analyze the environmental and health impacts of this extreme event.

For example, researchers are using model results in studies of the birth weights of infants whose mothers were near the World Trade Center on Sept. 11, 2001, when they were pregnant and of the incidence of asthma during the first weeks after the attack. The model helps them estimate human exposure levels based on where the plume was located, how much material it contained, and how long it remained.

To map the path of the plume of pollution from the World Trade Center, the researchers used mathematical models of micrometeorological atmospheric circulation and tracer transport, surface measurements, and space-based observations from the high-resolution Landsat imager and the Multi-angle Imaging SpectroRadiometer (MISR) on NASA's Terra satellite.

While some airborne material circulated within the urban "canyons," much of the material was lifted above the buildings and transported great distances. As a result, surface level exposures were not as frequent and intense as they could have been under different meteorological conditions. To simulate the transport of pollutants in the plume, the researchers had to understand its behavior on scales ranging from tens of meters to several hundred kilometers. They calculated atmospheric motions using a multi-grid regional atmospheric modeling system covering scales from 250 meters to 300 kilometers.

To calculate pollutant transport, they used a hybrid particle and concentration transport model. They evaluated their model's simulated pollutant concentrations, transport, direction, and timing, by comparing the results with fine-scale aerosol measurements routinely acquired from the roofs of New York City public school buildings.

The researchers calculated the evolution of the plume using a "Lagrangian" transport model, which considers the plume to be a collection of parcels that flow downwind. They found that for the model results to match the observations, the peak aerosol emissions in the World Trade Center fire must reach about 35 to 350 kg of particles per hour - thus, the concentration of aerosols within the core of the WTC plume was higher than the routine aerosol pollution in the world's most polluted cities.

Since wind speed and direction can change dramatically at different levels in the atmosphere, knowing the height of the aerosol plume was a crucial part of ensuring that the model produced realistic results. JPL scientists used stereo images of the region acquired by the MISR instrument at about noon on September 12, 2001, combined with ground-based photographs of the plume, to determine the plume height. A natural color MISR image appears here (acquired by MISR's 70° forward-viewing camera on September 12) along with histograms of stereo-derived elevations at four points (P1, P2, P3, P4) progressing from the World Trade Center source to about 70 kilometers downwind.

In addition to plume altitude and direction, MISR also provided information about plume evolution. Researchers could trace the plume's development by comparing the combination of airborne particles observed near the plume's source with particles that appear downwind in this MISR snapshot. The researchers also use MISR observations to check how well their model estimates the amount of particulate material the plume contained.

The scientists published their findings in the July issue of the journal Environmental Fluid Mechanics. The full citation is: Stenchikov, G., N. Lahoti, D.J. Diner, R. Kahn, P. Lioy, and P. Georgopoulos (2006). Multiscale plume transport from the collapse of the World Trade Center on September 11, 2001. Environmental Fluid Mech., doi 10.1007/s10652-006-9001-8.

MISR was built and is managed by NASA's Jet Propulsion Laboratory, Pasadena, Calif., for NASA's Science Mission Directorate, Washington, D.C. The Terra satellite is managed by NASA's Goddard Space Flight Center, Greenbelt, Md. JPL is a division of the California Institute of Technology.

Credit: Image credit: NASA/GSFC/LaRC/JPL, MISR Team.
Text acknowledgment: Clare Averill (Raytheon/Jet Propulsion Laboratory), Ralph Kahn and Rosemary Sullivant (Jet Propulsion Laboratory).

<< RETURN TO GALLERY